Paint protection films can make a significant difference in the life-span of a flawless painting However, it is also an additional cost when assembling. You may be wondering whether it is worth it?
We’ve listed the pros and drawbacks of using paint protection films in this easy pros and cons list to help you assess the options available to you:
PROS: The Benefits of Films for Paint Protection
It’s invisible: You could be covering your car’s paint but a thin translucent layer of film for protection (PPF) is virtually impossible to spot. Modern films provide long-lasting and long-lasting protection without the bulky thickness. The majority of them are just 8 millimeters (0.0008 millimeters) and stop less than 0.1 percent of light from entering the paint!
Flexible to meet your needs It’s easy to choose particular areas of the vehicle using die-cut anti-chipping film or wrap entire body panels depending on the needs of your project.
Hydrophobic properties: The automotive Paint protection film has hydrophobic properties. It means that contaminants and liquids are able to be absorbed and then run off, (like a waxed hood). It’s much easier to keep the shine of your paintwork by removing dirt, oil, smudges, mud and streaks.
Increases the life of a vehicle’s service The value of an automobile decreases because years of wear and tear deteriorate the vehicle’s mechanical characteristics and look and shine. Films that protect the paint will help to prolong the life of the vehicle by effectively removing debris, stones, sand, as well as other impacts which result in accidental chips, scratches and scratches. Certain films can even self-heal.
Easy to apply than other options Ceramic coatings are a commonly used method for protecting your paint. They are, however, messy, require expensive equipment, and can prolong the already lengthy curing period for the process of painting. These inefficiencies can hurt your margins. PPF installation is simple and allows you to transmit savings OEMs and increases bargaining ability.
CONS: The Drawbacks of Films for Paint Protection
Initial Costs: It’s more costly to apply a film of protection to paint rather than leaving the paint in its original state. However, the extra expenses are more than by increase in value, especially in high-risk areas within the car. It is possible to reduce costs by utilizing protection films in only those the areas that are most likely to be exposed to impact and contaminates (i.e. Fenders, fenders lower body panels front fascia, rear mirrors, and side panels).
The Film could be applied in a wrong way Paint protection film is only a viable solution when it is applied to the entire surface in a clean method, free of wrinkles, ripples and bubbles. You can reduce the risk of applying the film incorrectly by selecting a trusted supplier and providing your staff with a product that is easy to apply and requires only minimal training to apply.
Certain films turn yellow over time This is a frequent problem with older films that yellow and degrade in the presence of a lot of UV exposure (a that is a requirement for the outside of a vehicle). The latest materials don’t have this issue. Urethane films of the present have flawless transparency throughout their service duration.
It is time to replace it Films for paint protection typically come with warranties of 5, 10 and 12 years. After that the quality of the film can’t be guarantee. But this is an important period of optimal service and re-installing an entire paint job in the time (due insufficient protection) will be a major cost.
The Car Still requires paint: Films for protection against paint won’t stop the lengthy and costly painting process. They will only protect the paint after it’s dried. If line times are an issue then you may want to consider replacing your paint with films. They have vivid colours that closely replicate how they look and perform automobile paint, but without the hassle.
The benefits won’t always be greater than the drawbacks of using paint protection film, but that’s dependent on your financial budget and the size of your venture, and the expected operating conditions of your product. However, they’ll increase you’re products whatever way you decide to utilize them. Contact a supplier today to get more information.
